Kenton high quality ready made leads

Kenton Leads. A range of leads for connecting to Kenton equipment.

din to 3.5mm jack
Kenton 1 x 5 pin DIN plug to 2 x 3.5mm jack plug (for solo to tb303 (pins 1 & 3 connect to the jacks)

This lead has two intended uses:

1 - with a Pro-SOLO mkII
the DIN plug end will plug into the THRU socket (set to Aux mode) to access aux outputs 2 & 3, which are intended to be used to drive the accent and slide inputs of a TB-303 which has been fitted with a Kenton 5 Socket upgrade.

2 - with a Pro-SOLO mk1
the 3.5mm jack plugs will plug into the CV & Gate outputs of the Pro-SOLO used in sync mode, the DIN plug can then be plugged into any Sync 24 input on equipment)

Inc. Vat: £7.56

Exc. Vat: £6.30


euro mains plug
Kenton 8 pin mini-Din to 14 pin IEEE DCB cable for ProDCB

8 pin mini DIN plug to 14 pin IEEE DCB cable - 2 metres.
Used for connecting a PRO-DCB or optional Pro-2000 DCB port to a Juno 60 or to a Jupiter 8 which has the 14 pin IEEE connector(some JP8s have a 20 pin connector). N.B. This cable is supplied free with a PRO-DCB or optional Pro-2000 DCB port unless the 20 pin version is requested.

Inc. Vat: £17.64

Exc. Vat: £14.70


Mains plug USA
Kenton 8 pin mini-Din to 20 pin plug DCB cable for ProDCB

8 pin mini DIN plug to 20 pin flat (OP8) DCB cable - 2 metres.
Used for connecting a PRO-DCB or optional Pro-2000 DCB port to a Juno 60 or to a Jupiter 8 which has the 20 pin flat connector (some JP8s have a 14 pin IEEE connector). N.B. This cable is supplied free with a PRO-DCB or optional Pro-2000 DCB port if requested at time of ordering, otherwise the 14 pin version is automatically supplied.

Inc. Vat: £31.50

Exc. Vat: £26.25


Mains ANZIAC
Kenton 15 pin D to 14 pin IEEE DCB cable (for PRO-4 only)

15 pin D plug to 14 pin IEEE DCB cable - 2 metres.
Used for connecting PRO-4 DCB port to a Juno 60 or to a Jupiter 8 which has the 14 pin IEEE connector (some have a 20 pin connector).

Inc. Vat: £31.50

Exc. Vat: £26.25


Mains fig 8
Kenton 15 pin D to 20 pin plug DCB cable (for PRO-4 only

15 pin D plug to 20 pin flat DCB cable - 2 metres.
Used for connecting PRO-4 DCB port to a Jupiter 8 which has the 20 pin flat (OP8) connector (some have a 14 pin IEEE connector).

Inc. Vat: £45.36

Exc. Vat: £37.80


mains euro fig8
Kenton Kadi cable for use with Pro Kadi / Pro2000 / Pro4

KADI cable 15 pin high density D plug to 15 pin high density D plug.
Used for connecting the KADI port of a Pro-KADI, Pro-2000 or Pro-4 to any piece of equipment which has been fitted with a KADI socket.
Note: this cable is included free with a Pro-KADI or Pro-2000 optional KADI port - unless a Wasp cable is specified at time of ordering. (It is/was not supplied with a Pro-4).

Inc. Vat: £25.20

Exc. Vat: £21.00


mains ANZ fig8
Kenton Wasp cable for use with Pro Kadi / Pro2000 / Pro4

Wasp cable 15 pin high density D plug to 7 pin DIN plug.
Used for connecting the KADI port of a Pro-KADI, Pro-2000 or Pro-4 to a Wasp or Gnat synthesiser. Note: this cable is included free with a Pro-KADI or Pro-2000 optional KADI port - if specified at time of ordering. (It is/was not supplied with a Pro-4).

Inc. Vat: £31.50

Exc. Vat: £26.25